3DL SIDEBAR TEST
3D Laminate (3DL)
Also Known As: Rigid Thermoformable Foils (RTF), Decorative Vinyls or Vinyl Foils
+ What is 3DL?
Specified on components for furniture or architectural wall panels, 3D Laminates are thin decorative thermoplastic overlays, laminated to carved or shaped MDF panels.
They are unique in that they can be pressed to panels with 3D details machined into their faces and edges (hence the name!), as well as unconventionally shaped panels and panel edges.
3DL’s ability to “self-edge” – wrap seamlessly around five of six panel edges as well as interior cut-outs – reduces processing steps and helps seal the panel core against moisture and bacteria. This ability also helps create “soft” edges that mimic shaped solid wood, stone, solid surface and machined metals.
+ Why 3DL?
3DL panels are used in residential and commercial projects in applications that call for decorative panels with unusual shapes, deep three-dimensional surface details and soft edges. 3DL panels have seamless faces, making them waterproof easy to keep clean. 3DL components with hardwood or exotic wood designs save these species from harvest while offering higher durability and easier maintenance. The most common substrate used in 3DL panels is MDF, a better-than-carbon-neutral CARB2 compliant LEED-friendly material.
+ Where is 3DL Used?
- Healthcare casework, bedside tabletops
- Cabinet doors and drawer fronts
- Worktops, tabletops, transaction counter
- Retail display shelves
- Architectural wall panels
- Closet and storage systems
- Commercial Signage
Commercial: Use of 3DL surfaces has grown in recent years as the office furniture industry has embraced nonstandard and organic shapes for worktops, and with the growing need for integrated cable management cutouts and channels.
Its durability and cleanability make it a very good choice for healthcare, hospitality, education and retail. Target and Best Buy have specified 3DL materials for their transaction counters. Carved 3DL panels are commonly used in architectural feature walls in hotels, restaurants and other public spaces.
Residential: Kitchen and bath cabinet doors and drawer fronts in 3DL are a durable alternative to solid wood and lacquered components. Also found in headboards, closet and storage systems, shelving and entertainment centers.
+ Properties and Performance:
- 3DL surfaces wrap five of six panel sides, creating a seamless panel face
- Soft, ergonomic shapes and edges that can’t be created with other decorative surfaces
- Waterproof panel faces and edges
- Highly resistant to delamination
- Wear resistance greater than HPL, up to 450 Taber test cycles versus 400 for HPL
- Higher scratch resistance than HPL
- Higher impact resistance than HPL or TFL
- Enhanced wear- and chemical-resistant materials available
3DL materials are less prone to damage than woods, veneers, lacquered surfaces and solid surfaces. Finished 3DL components have seamless faces and edges, making them impervious to moisture and bacteria, and very unlikely to delaminate. Because the surfaces are thermoplastic, impact damage won’t crack 3DL faces. The amount of “denting” depends on the density of the substrate.
Surface Visuals: 3DL overlays are available in solid colors, metallics, woodgrains and other designs, using printed rotogravure machines using water-based or solvent-based inks.
Textures: Woodgrain, brushed aluminum and similar textures are applied to the overlay with embossing rolls. High gloss, matte and finger-proof super-matte textures are available.
Shapes/Form: 3DL is unique in that it can be used to create intricately shaped and carved panels machined in MDF.
Design Matches: 3DL producers publish guides to matches in complementary materials – TFL, HPL, decorative paper foils and edge treatments, as well as peel-and-stick materials.
Edges: 3DL is “self-edging” – the fabrication process wraps the material around panel edges.
+ Material Makeup and Manufacturing:
- 3DL is a thin sheet of rigid thermosetting PVC or PET (polyethylene terephthalate) polymers
- Furniture-grade PVC contains little or no plasticizers and typically doesn’t contain the heavy metals or other ingredients found in products like vinyl shower curtains
- It is manufactured with a lacquer on top for scratch resistance, and a primer on the back to improve adhesion
- Substrate is almost always MDF for its homogeneous smoothness and machinability
- The backs of the substrates may usually carry a decorative TFL surface, which may match the 3DL design
- Components are created in a membrane or vacuum press, where the surface is bonded to the substrate with a heat-activated adhesive under heat and pressure
- Adhesive types: Water-based, polyurethane dispersion or heat-activated adhesives are sprayed onto the substrate before pressing, or a hotmelt adhesive may be preapplied to the back of the 3DL material
3DL overlays are manufactured in carefully controlled factories and delivered to components manufactures in sheet or roll form. PVC production requires less energy than PET production.
+ Component Fabrication:
Machined MDF parts are sprayed with a heat-activated water-based adhesive and staged at the press intake. The 3DL surface is laid over the parts and shuttled into the press.
Once inside, the 3DL is drawn up to a heated surface above the parts bed to increase its pliability, then laminated to the parts by an inflatable membrane pressing from above, or by vacuum pressure pulling the material down from below in combination with positive pressure from above. This process effectively bonds the surface to every detail machined into the MDF substrate, and creates a tight seam where the edges and back meet.
After cooling, the overlay is trimmed at the back edges to finish the 3DL component.
+ Environmental Details:
3DL components made in North America have MDF composite wood cores that have been found to be “better than carbon neutral” – utilizing wood fiber that would otherwise be landfilled or incinerated, and sequesters more carbon than is expended in the panel’s manufacture.
The thermoplastic surface only about 3% of the weight of the panel, which means the overall panel can be considered “green” given the LEED advantages of the composite panel core:
- MR 7: Certified Materials – North American composite wood panels are FSC certified
- MR 4.2: Recycled content – North American composite wood panels contain
- EQ 4.4: Low-Emitting Materials – North composite wood panels meet CARB II requirements The material’s realistic woodgrain visuals and textures allow designers to use replace fragile and rare woods and veneers with more durable, design-consistent and cost-effective 3DL surfaces.
+ 3D Laminates Suppliers
Material Suppliers in one list
LINK TO CASE STUDIES, SUPPLIER PROFILES